TCP

From PeformIQ Upgrade
Revision as of 15:27, 22 October 2007 by PeterHarding (talk | contribs) (New page: == Full Name == Transmission Control Protocol (also known as TCP) == Information == The Transmission Control Protocol (TCP) is one of the core protocols of the Internet protocol suite, ...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Full Name

Transmission Control Protocol (also known as TCP)

Information

The Transmission Control Protocol (TCP) is one of the core protocols of the Internet protocol suite, often simply referred to as TCP/IP. Using TCP, applications on networked hosts can create connections to one another, over which they can exchange streams of data using Stream Sockets. The protocol guarantees reliable and in-order delivery of data from sender to receiver. TCP also distinguishes data for multiple connections by concurrent applications (e.g., Web server and e-mail server) running on the same host.

TCP supports many of the Internet's most popular application protocols and resulting applications, including the World Wide Web, e-mail, File Transfer Protocol and Secure Shell.

In the Internet protocol suite, TCP is the intermediate layer between the Internet Protocol (IP) below it, and an application above it. Applications often need reliable pipe-like connections to each other, whereas the Internet Protocol does not provide such streams, but rather only best effort delivery (i.e., unreliable packets). TCP does the task of the transport layer in the simplified OSI model of computer networks. The other main transport-level Internet protocol is UDP.

Applications send streams of octets (8-bit bytes) to TCP for delivery through the network, and TCP divides the byte stream into appropriately sized segments (usually delineated by the maximum transmission unit (MTU) size of the data link layer of the network to which the computer is attached). TCP then passes the resulting packets to the Internet Protocol, for delivery through a network to the TCP module of the entity at the other end. TCP checks to make sure that no packets are lost by giving each packet a sequence number, which is also used to make sure that the data is delivered to the entity at the other end in the correct order. The TCP module at the far end sends back an acknowledgement for packets which have been successfully received; a timer at the sending TCP will cause a timeout if an acknowledgement is not received within a reasonable round-trip time (or RTT), and the (presumably) lost data will then be re-transmitted. The TCP checks that no bytes are corrupted by using a checksum; one is computed at the sender for each block of data before it is sent, and checked at the receiver.

Related Links